Pipe clamps for plants: types, materials and how to choose the right ones

Collari per tubi

When talking about industrial plants, we refer to more or less complex systems made of different kinds of components, each of them with a specific function, essential to ensure the proper functioning of the system in general.

In other occasions we have talked about and focused on tubes and fittings; today, we will discuss the clamps in more detail. Clamps are usually small and often simple components used to support pipes, to keep them in position, to reduce vibrations occurring when working the systems.

So, they are used to fix pipes to the structural elements such as load-bearing walls, ceilings etc, improving the general reliability of the plant.

In many cases they are hidden; nevertheless, they can not be considered as secondary components, but as an essential part of the project. There are several kinds of clamps; for this reason, it is extremely important to find the most suitable one.

Among the main clamps categories, there are metal clamps, clamps with elastomer insert, clamps for heavy installations, for wall or ceiling fixing.
Metal clamps offer strength and mechanical resistance; clamps with elastomer inserts help absorb vibrations and noise and protect the tube surface; clamps for heavy installations are designed for large-diameter pipes or high loads; clamps for wall or ceiling fixing differ mainly in the way they are anchored to the structure.

 

The Tecra range

Tecra offers a wide range of clamps, many of them always available in stock. Precisely, we supply the so-called “hydraulic pipe clamp”. They can be divided into 3 big categories: twin series, standardseries and heavy series each of them including, in turn, different kinds: single/twin, with or without the plate, AISI 304 or 316 plate.
The twin series allows two pipes to be fixed with a single clamp, saving space when several lines run in parallel; the standard series is suitable for most applications with moderate loads; the heavy series is designed for larger diameters and more demanding operating conditions, with higher loads and vibrations.

They can be supplied unmounted or assembled depending on the type; the body has got different colours (black, blue, yellow, natural and green) and it can be made of aluminium, polyamide, polypropylene or TPE (thermoplastic elastomer); they can be with or without a cover plate and the dimensions of the tubes they can support may vary from 6 mm to 406,4 mm.

The material can influence the mechanical resistance, the durability and the behaviour of the component when working the systems. So, for example, galvanized steel is preferred for indoor applications; stainless steel, on the other hand, is better when a high corrosion resistance is required, elastomer inserts are more suitable in case of vibrations; in the end plastic materials are better in case of very particular applications that need lightness, more flexibility and resistance to particular chemical agents.

There isn’t the best material at all: the choice depends on the installation environments, on stress, on the working temperature and on the compatibility with the tube and the fluid flowing inside.

 

Simple practical suggestions to find the proper clamp

First of all, it is necessary to do a careful technical evaluation that should take into account 6 main aspects:

  1. The external diameter of the tube: since the tube must perfectly adapt to the clamp avoiding improper anchoring and tightening that could have negative consequences on the stability especially in case of stress.
  2. The weight and loading; this means that the clamp must be able to support both the tube and the fluid flowing inside.
  3. The place of installation, the presence of aggressive/corrosive agents, the presence/absence of humidity: these factors mainly determine the choice of the clamp and plate material.
  4. Vibrations and thermal expansions that could lead to select clamps with both fixed and moving parts.
  5. Mounting method or, better, to which they must be anchored: walls, ceilings, floors, profiles or metal structures require different mounting solutions.
  6. Operating conditions, specific requirements and final use of the plant: pressure, temperature and type of fluid affect the choice as much as the physical characteristics of the pipe.

 

It should be underlined that the evaluation must not be based on a single factor: choosing a clamp only on the basis of its diameter, without considering the other aspects, can compromise the best choice, which is made by taking all 6 points into account.

Also for this kind of products, Tecra will be your reliable partner.

For more information about the stock availability and about the range in general, contact our staff to find the most coherent solution for your plants requirements.

SHARE ARTICLE

DO YOU HAVE TO MARKET YOUR PRODUCTS?

Fill in the form and we will contact you!

PROJECTS

Discover some of the projects we have carried out around the world.

Explore our latest projects now!
PRODUCTS

Explore our selection of AISI 316/316L stainless steel products and discover the quality that makes the difference.

Discover our products