Copper tube annealed in coils and hard straight length for plumbing and heating purposes

Copper tube Characteristics

Copper ITS Cu-DHP CW024A (Cu = 99.90% min. – P = 0.0015 ÷ 0.040%) according to UNI EN 1412 – physical state, annealed in coils (R220) and raw in rods (R290) according to EN 1057 – carbonaceous residue ≤0,20 mg/dm2- dimensions and tolerances according to EN 1057.

Fields of application

Plumbing, air distribution, drinking water (D.P.R. 1095/68 – D.M. 174/04 – D.E. 98/83 and D.L. 31/01), gas and fluids in general.

Diametro Tubo rame Diameter Copper pipe mm	Spessore Tubo rame Thickness Copper pipe mm	Lunghezza rotolo Roll lenght Mtr.	Lunghezza verghe Rods lenght Mtr	Contenuto Acqua Water flow l/m	Pressione esercizio tubo ricotto in rotoli Working pressure annealed Copper in coils Mpa	Pressione esercizio tubo crudo in verghe Working pressure hard straight length Mpa
6	1	50	5	0,013	18,7	24,65
8	1	50	5	0,028	14,03	18,49
10	1	50	5	0,05	11,22	14,79
12	1	50	5	0,079	9,35	12,33
14	1	50	5	0,113	8,01	10,56
15	1	50	5	0,133	7,48	9,86
16	1	50	5	0,154	7,01	9,24
18	1	50	5	0,201	6,23	8,22
22	1	55	5	0,314	5,1	6,72
22	1,5	50	5	0,284	7,65	10,08
28	1	50	5	0,531	4,01	5,28
28	1,5	25	5	0,491	6,01	7,92